Race 370 (Belgie Fork)
Race 370 (Belgie Fork)
Couldn't load pickup availability
Enquiry
Enquiry
For info on availability, please contact sales@curvecycling.com,
call us on 03 9088 0274.
Alternatively, Enquire Now.
Shipping
Shipping
Free International Shipping for all Framesets, Complete Bikes, Forks, Wheelsets, Bars and Rocket Pooches is included in the sales price (*excludes Belgie DISC Ultegra)
All other products are subject to shipping charges calculated at checkout. See our Shipping Policy for further details.
FAQs
FAQs
Check HERE for further info regarding shipping, custom paint, bike set up and more.
| Will the Ride 415 work with my frame? |
The Race 370 fork has a tapered 1 1/8th"-1.5" (28.6-39mm) steerer with a length of 300 mm. We use this steerer type on all of our forks and 44mm head tubes on all Curve frames. It may work with your frame, but you may have to change your headset or headset bearings to make it work. Please have a professional bicycle mechanic fit your fork.
|
| What hubs can I use with this fork? |
The Race 370 fork is designed for 12 x 100 thru axle disc hubs.
|
| What tyres can I use with the Race 370 fork? |
Recommended Tyre: 700C x 23-33C Max Tyre: 700C x 33C
|
| What else is included with the Race 370 fork? |
Curve 12mm Thru-Axle & a steerer expander with 'Race Ride Seek' stem cap.
|
| Can I fit Hope RX4+ Brakes |
Yes
|
| What is the maximum rotor size I can run? |
160mm
|
|
Can I run a rack?
|
The Race 370 fork does not support mounting a rack.
|
|
I prefer a very upright riding position, how many spacers can I put under my stem?
|
As with most carbon steerer forks on the market, we do not recommend running more than 30 mm of spacers below the stem (40mm can be approved in certain cases). We also suggest putting a 3-5 mm spacer above the stem to ensure precise compression and ample clearance of your stem cap.
|
|
What's the weight limit?
|
Our Race 370 fork has been tested to ISO 4210 standards for Road riding, so the maximum allowed system weight (bike, rider & luggage) is 120 kg.
|
|
How do I fit the steerer expander plug?
|
The full length of the steerer expander plug should extend past the stack of the stem, so do not leave excess steerer above the stem other than for light riding while dialling in your fit.
The expanding feature of the plug consists of 3 wedges - it is extremely important that the gap between the wedges DO NOT line up with the gap at the back of the stem clamp. Failure to follow this advice can lead to damage to the steerer.
|
Our flat mount, carbon disc fork, with added tyre clearance is built for all road conditions.
Choose Your Own Adventure
Originally titled, the Belgie Fork, the Race 370 was built to complement the Belgie V3 or Belgie Air frameset. The result is a flat mount, carbon disc fork, allowing tyre clearance of up to 33 mm both in slick road and light gravel/cyclocross tyres.
The Race 370 can handle light gravel, or cobble, and has been tested heavily in ultra-endurance races such as the Trans Am, Indian Pacific Wheel Race and the Transcontinental, by some of the world's toughest riders.
It’s In The Details
The Race 370 comes with a matte black finish, featuring a white chevron on the outer blade, and a white Curve logo on the inner blade. The Race 370 also includes a carbon steerer expander with a printed Race Ride Seek stem cap.
Fork Includes
| Fork: |
Carbon Construction |
| Other: | Carbon expander 12 x 100 mm front axle Stem cap: Race Ride Seek |
| Please Note: | Important Note: Please be aware that due to the steerer length of the Ride 370 fork (300mm), when paired with Ultra frames in sizes 61 and 64 only 10mm and 0mm of spacers will fit under the stem, respectively, due to the longer headtubes (61 cm - 240 mm, 64 cm - 250 mm). If more stack is needed, an alternate fork with a longer steerer tube may be required. Please Contact Us to talk through possible options if this may affect you. |
The remarkable Seek 430 FM bikepacking carbon fork
We have put a hell of a lot of work into the new Seek 430 FM fork to get it to where it is now. Our primary focus was to improve the load carrying capability of a carbon fork, but we managed to include a some other improvements, too...